dmesg - GraphicsMagick-Local Adaptive Thresholding
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-75-generic (buildd@kissel) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #110-Ubuntu SMP Tue Dec 16 19:11:55 UTC 2014 (Ubuntu 3.2.0-75.110-generic 3.2.64)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000009c73b000 (usable)
BIOS-e820: 000000009c73b000 - 000000009d1e3000 (reserved)
BIOS-e820: 000000009d1e3000 - 000000009d22b000 (usable)
BIOS-e820: 000000009d22b000 - 000000009d2e4000 (ACPI NVS)
BIOS-e820: 000000009d2e4000 - 000000009e349000 (reserved)
BIOS-e820: 000000009e349000 - 000000009e34a000 (usable)
BIOS-e820: 000000009e34a000 - 000000009e352000 (ACPI NVS)
BIOS-e820: 000000009e352000 - 000000009e49d000 (usable)
BIOS-e820: 000000009e49d000 - 000000009e93c000 (reserved)
BIOS-e820: 000000009e93c000 - 000000009e979000 (usable)
BIOS-e820: 000000009e979000 - 000000009eff2000 (reserved)
BIOS-e820: 000000009eff2000 - 000000009f000000 (usable)
BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000013f000000 (usable)
NX (Execute Disable) protection: active
EFI v2.31 by American Megatrends
ACPI=0x9d2af000 ACPI 2.0=0x9d2af000 SMBIOS=0xf04c0 MPS=0xfd480
Kernel-defined memdesc doesn't match the one from EFI!
EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
EFI: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003f000) (0MB)
EFI: mem02: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
EFI: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
EFI: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005bf000) (4MB)
EFI: mem05: type=7, attr=0xf, range=[0x00000000005bf000-0x0000000001000000) (10MB)
EFI: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
EFI: mem07: type=7, attr=0xf, range=[0x0000000001100000-0x0000000035900000) (840MB)
EFI: mem08: type=2, attr=0xf, range=[0x0000000035900000-0x0000000036c78000) (19MB)
EFI: mem09: type=7, attr=0xf, range=[0x0000000036c78000-0x00000000693db000) (807MB)
EFI: mem10: type=2, attr=0xf, range=[0x00000000693db000-0x000000008d67e000) (578MB)
EFI: mem11: type=7, attr=0xf, range=[0x000000008d67e000-0x000000008d684000) (0MB)
EFI: mem12: type=1, attr=0xf, range=[0x000000008d684000-0x000000008d6a1000) (0MB)
EFI: mem13: type=7, attr=0xf, range=[0x000000008d6a1000-0x000000009087d000) (49MB)
EFI: mem14: type=4, attr=0xf, range=[0x000000009087d000-0x0000000090b13000) (2MB)
EFI: mem15: type=7, attr=0xf, range=[0x0000000090b13000-0x0000000090b7f000) (0MB)
EFI: mem16: type=4, attr=0xf, range=[0x0000000090b7f000-0x0000000090bae000) (0MB)
EFI: mem17: type=7, attr=0xf, range=[0x0000000090bae000-0x0000000090bc1000) (0MB)
EFI: mem18: type=4, attr=0xf, range=[0x0000000090bc1000-0x0000000090bc3000) (0MB)
EFI: mem19: type=7, attr=0xf, range=[0x0000000090bc3000-0x0000000090bc5000) (0MB)
EFI: mem20: type=4, attr=0xf, range=[0x0000000090bc5000-0x0000000090bd4000) (0MB)
EFI: mem21: type=7, attr=0xf, range=[0x0000000090bd4000-0x0000000090bd5000) (0MB)
EFI: mem22: type=4, attr=0xf, range=[0x0000000090bd5000-0x0000000090bd8000) (0MB)
EFI: mem23: type=7, attr=0xf, range=[0x0000000090bd8000-0x0000000090bda000) (0MB)
EFI: mem24: type=4, attr=0xf, range=[0x0000000090bda000-0x000000009c13b000) (181MB)
EFI: mem25: type=7, attr=0xf, range=[0x000000009c13b000-0x000000009c4a0000) (3MB)
EFI: mem26: type=3, attr=0xf, range=[0x000000009c4a0000-0x000000009c73b000) (2MB)
EFI: mem27: type=0, attr=0xf, range=[0x000000009c73b000-0x000000009c95e000) (2MB)
EFI: mem28: type=0, attr=0xf, range=[0x000000009c95e000-0x000000009d17c000) (8MB)
EFI: mem29: type=0, attr=0xf, range=[0x000000009d17c000-0x000000009d182000) (0MB)
EFI: mem30: type=0, attr=0xf, range=[0x000000009d182000-0x000000009d1e3000) (0MB)
EFI: mem31: type=7, attr=0xf, range=[0x000000009d1e3000-0x000000009d225000) (0MB)
EFI: mem32: type=2, attr=0xf, range=[0x000000009d225000-0x000000009d22b000) (0MB)
EFI: mem33: type=10, attr=0xf, range=[0x000000009d22b000-0x000000009d2e4000) (0MB)
EFI: mem34: type=6, attr=0x800000000000000f, range=[0x000000009d2e4000-0x000000009e12a000) (14MB)
EFI: mem35: type=6, attr=0x800000000000000f, range=[0x000000009e12a000-0x000000009e23f000) (1MB)
EFI: mem36: type=6, attr=0x800000000000000f, range=[0x000000009e23f000-0x000000009e241000) (0MB)
EFI: mem37: type=6, attr=0x800000000000000f, range=[0x000000009e241000-0x000000009e2fe000) (0MB)
EFI: mem38: type=5, attr=0x800000000000000f, range=[0x000000009e2fe000-0x000000009e30d000) (0MB)
EFI: mem39: type=5, attr=0x800000000000000f, range=[0x000000009e30d000-0x000000009e349000) (0MB)
EFI: mem40: type=4, attr=0xf, range=[0x000000009e349000-0x000000009e34a000) (0MB)
EFI: mem41: type=10, attr=0xf, range=[0x000000009e34a000-0x000000009e352000) (0MB)
EFI: mem42: type=4, attr=0xf, range=[0x000000009e352000-0x000000009e49d000) (1MB)
EFI: mem43: type=6, attr=0x800000000000000f, range=[0x000000009e49d000-0x000000009e93c000) (4MB)
EFI: mem44: type=4, attr=0xf, range=[0x000000009e93c000-0x000000009e93e000) (0MB)
EFI: mem45: type=3, attr=0xf, range=[0x000000009e93e000-0x000000009e942000) (0MB)
EFI: mem46: type=4, attr=0xf, range=[0x000000009e942000-0x000000009e95a000) (0MB)
EFI: mem47: type=3, attr=0xf, range=[0x000000009e95a000-0x000000009e96c000) (0MB)
EFI: mem48: type=4, attr=0xf, range=[0x000000009e96c000-0x000000009e96d000) (0MB)
EFI: mem49: type=3, attr=0xf, range=[0x000000009e96d000-0x000000009e96f000) (0MB)
EFI: mem50: type=4, attr=0xf, range=[0x000000009e96f000-0x000000009e979000) (0MB)
EFI: mem51: type=6, attr=0x800000000000000f, range=[0x000000009e979000-0x000000009efea000) (6MB)
EFI: mem52: type=0, attr=0xf, range=[0x000000009efea000-0x000000009eff2000) (0MB)
EFI: mem53: type=4, attr=0xf, range=[0x000000009eff2000-0x000000009f000000) (0MB)
EFI: mem54: type=7, attr=0xf, range=[0x0000000100000000-0x000000013f000000) (1008MB)
EFI: mem55: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb01000) (0MB)
EFI: mem56: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
EFI: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
EFI: mem58: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
EFI: mem59: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
EFI: mem60: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
EFI: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
EFI: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
EFI: mem63: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Larne CRB, BIOS 4.6.5.4 05/28/2014
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x13f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFE0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000013f000000 aka 5104M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000a0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x9f000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fd6b0] fd6b0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000009f000000
0000000000 - 0080000000 page 1G
0080000000 - 009f000000 page 2M
kernel direct mapping tables up to 9f000000 @ 1fffe000-20000000
init_memory_mapping: 0000000100000000-000000013f000000
0100000000 - 013f000000 page 2M
kernel direct mapping tables up to 13f000000 @ 9d229000-9d22b000
RAMDISK: 35900000 - 36c78000
ACPI: RSDP 000000009d2af000 00024 (v02 ALASKA)
ACPI: XSDT 000000009d2af098 000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000009d2b3e40 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
ACPI: DSDT 000000009d2af1d8 04C62 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000009d2dae80 00040
ACPI: APIC 000000009d2b3f50 0007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000009d2b3fd0 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 000000009d2b4018 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000009d2b40b8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: ASF! 000000009d2b40f8 000D6 (v32 AMD SB700ASF 00000001 TFSM 000F4240)
ACPI: HPET 000000009d2b41d0 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: WDRT 000000009d2b4208 00047 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 000000009d2b4250 00038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 000000009d2b4288 00DA8 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 000000009d2b5030 0487A (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: SSDT 000000009d2b98b0 006CA (v01 AMD CPMADPS4 00000001 INTL 20051117)
ACPI: SSDT 000000009d2b9f80 00474 (v01 AMD CPMXPRES 00000001 INTL 20051117)
ACPI: SSDT 000000009d2ba3f8 01207 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 000000009d2bb600 01457 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 000000009d2bca58 0008F (v01 AMD CPMDFMOT 00000001 INTL 20051117)
ACPI: SSDT 000000009d2bcae8 01087 (v01 AMD CPMZPODD 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000013f000000
Initmem setup node 0 0000000000000000-000000013f000000
NODE_DATA [000000013effb000 - 000000013effffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0013f000
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
0: 0x00000010 -> 0x000000a0
0: 0x00000100 -> 0x0009c73b
0: 0x0009d1e3 -> 0x0009d22b
0: 0x0009e349 -> 0x0009e34a
0: 0x0009e352 -> 0x0009e49d
0: 0x0009e93c -> 0x0009e979
0: 0x0009eff2 -> 0x0009f000
0: 0x00100000 -> 0x0013f000
On node 0 totalpages: 899242
DMA zone: 64 pages used for memmap
DMA zone: 9 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 620890 pages, LIFO batch:31
Normal zone: 4032 pages used for memmap
Normal zone: 254016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000009c73b000 - 000000009d1e3000
PM: Registered nosave memory: 000000009d22b000 - 000000009d2e4000
PM: Registered nosave memory: 000000009d2e4000 - 000000009e349000
PM: Registered nosave memory: 000000009e34a000 - 000000009e352000
PM: Registered nosave memory: 000000009e49d000 - 000000009e93c000
PM: Registered nosave memory: 000000009e979000 - 000000009eff2000
PM: Registered nosave memory: 000000009f000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb01000
PM: Registered nosave memory: 00000000feb01000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000
PM: Registered nosave memory: 00000000fec02000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 9f000000 (gap: 9f000000:5fb00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013ec00000 s79040 r8192 d23360 u524288
pcpu-alloc: s79040 r8192 d23360 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 878817
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3244404k/5226496k available (6598k kernel code, 1629528k absent, 352564k reserved, 6608k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1024 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 29360128 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2195.817 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.63 BogoMIPS (lpj=8783268)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 009f000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 26617 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD GX-424CC SOC with Radeon(TM) R5E Graphics stepping 01
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3 Ok.
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (17565.87 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 9d22b000 (757760 bytes)
PM: Registering ACPI NVS region at 9e34a000 (32768 bytes)
print_constraints: dummy:
RTC time: 1:33:05, date: 02/02/15
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
Extended Config Space enabled on 0 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
Freeing initrd memory: 19936k freed
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1566] type 0 class 0x000600
pci 0000:00:01.0: [1002:9851] type 0 class 0x000300
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 24: [mem 0xfea00000-0xfea3ffff]
pci 0000:00:01.0: reg 30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: [1002:9840] type 0 class 0x000403
pci 0000:00:01.1: reg 10: [mem 0xfea64000-0xfea67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 0 class 0x000600
pci 0000:00:02.3: [1022:1439] type 1 class 0x000604
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PME# disabled
pci 0000:00:08.0: [1022:1537] type 0 class 0x001080
pci 0000:00:08.0: reg 10: [mem 0xd0900000-0xd091ffff 64bit pref]
pci 0000:00:08.0: reg 18: [mem 0xfe800000-0xfe8fffff]
pci 0000:00:08.0: reg 1c: [mem 0xfea70000-0xfea70fff]
pci 0000:00:08.0: reg 24: [mem 0xfea6a000-0xfea6bfff]
pci 0000:00:10.0: [1022:7814] type 0 class 0x000c03
pci 0000:00:10.0: reg 10: [mem 0xfea68000-0xfea69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xfea6f000-0xfea6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:11.0: PME# disabled
pci 0000:00:12.0: [1022:7808] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfea6e000-0xfea6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:13.0: [1022:7808] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfea6d000-0xfea6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
pci 0000:00:14.7: [1022:7813] type 0 class 0x000805
pci 0000:00:14.7: reg 10: [mem 0xfea6c000-0xfea6c0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:14.7: PME# disabled
pci 0000:00:18.0: [1022:1580] type 0 class 0x000600
pci 0000:00:18.1: [1022:1581] type 0 class 0x000600
pci 0000:00:18.2: [1022:1582] type 0 class 0x000600
pci 0000:00:18.3: [1022:1583] type 0 class 0x000600
pci 0000:00:18.4: [1022:1584] type 0 class 0x000600
pci 0000:00:18.5: [1022:1585] type 0 class 0x000600
pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [io 0xe300-0xe3ff]
pci 0000:01:00.0: reg 18: [mem 0xfe90f000-0xfe90ffff 64bit]
pci 0000:01:00.0: reg 20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: [10ec:816a] type 0 class 0x000700
pci 0000:01:00.1: reg 10: [io 0xe200-0xe2ff]
pci 0000:01:00.1: reg 18: [mem 0xfe90e000-0xfe90efff 64bit]
pci 0000:01:00.1: reg 20: [mem 0xfe908000-0xfe90bfff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:01:00.2: [10ec:816b] type 0 class 0x000700
pci 0000:01:00.2: reg 10: [io 0xe100-0xe1ff]
pci 0000:01:00.2: reg 18: [mem 0xfe90d000-0xfe90dfff 64bit]
pci 0000:01:00.2: reg 20: [mem 0xfe904000-0xfe907fff 64bit]
pci 0000:01:00.2: supports D1 D2
pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.3: [10ec:816c] type 0 class 0x000c07
pci 0000:01:00.3: reg 10: [io 0xe000-0xe0ff]
pci 0000:01:00.3: reg 18: [mem 0xfe90c000-0xfe90c0ff 64bit]
pci 0000:01:00.3: reg 20: [mem 0xfe900000-0xfe903fff 64bit]
pci 0000:01:00.3: supports D1 D2
pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.3: PME# disabled
pci 0000:00:02.3: PCI bridge to [bus 01-01]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000009c73b000 - 000000009fffffff
reserve RAM buffer: 000000009d22b000 - 000000009fffffff
reserve RAM buffer: 000000009e34a000 - 000000009fffffff
reserve RAM buffer: 000000009e49d000 - 000000009fffffff
reserve RAM buffer: 000000009e979000 - 000000009fffffff
reserve RAM buffer: 000000009f000000 - 000000009fffffff
reserve RAM buffer: 000000013f000000 - 000000013fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xa0000000-0xbfffffff]
system 00:02: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0063]
pnp 00:09: [io 0x0065]
pnp 00:09: [io 0x0067-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00b1]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x040b]
pnp 00:09: [io 0x04d6]
pnp 00:09: [io 0x0c00-0x0c01]
pnp 00:09: [io 0x0c14]
pnp 00:09: [io 0x0c50-0x0c51]
pnp 00:09: [io 0x0c52]
pnp 00:09: [io 0x0c6c]
pnp 00:09: [io 0x0c6f]
pnp 00:09: [io 0x0cd0-0x0cd1]
pnp 00:09: [io 0x0cd2-0x0cd3]
pnp 00:09: [io 0x0cd4-0x0cd5]
pnp 00:09: [io 0x0cd6-0x0cd7]
pnp 00:09: [io 0x0cd8-0x0cdf]
pnp 00:09: [io 0x0800-0x089f]
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0000-0x000f]
pnp 00:09: [io 0x0b20-0x0b3f]
pnp 00:09: [io 0x0900-0x090f]
pnp 00:09: [io 0x0910-0x091f]
pnp 00:09: [io 0xfe00-0xfefe]
pnp 00:09: [io 0x0060-0x005f disabled]
pnp 00:09: [io 0x0064-0x0063 disabled]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: [mem 0xfed80000-0xfed8ffff]
pnp 00:09: [mem 0xfed61000-0xfed70fff]
pnp 00:09: [mem 0xfec10000-0xfec10fff]
pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:09: [mem 0xff000000-0xffffffff]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0800-0x089f] has been reserved
system 00:09: [io 0x0b20-0x0b3f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: [irq 0 disabled]
pnp 00:0a: [irq 8]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.3: PCI bridge to [bus 01-01]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:02.3: PCI INT C -> GSI 50 (level, low) -> IRQ 50
pci 0000:00:02.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:10.0: PCI INT A disabled
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88008c87d000 - ffff88009087d000
software IO TLB at phys 0x8c87d000 - 0x9087d000
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1422840785.128:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 6752
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.3: setting latency timer to 64
pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90012180000, using 5632k, total 5632k
efifb: mode is 1600x900x32, linelength=6400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 200x56
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
serial 0000:01:00.1: enabling device (0001 -> 0003)
serial 0000:01:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33
serial 0000:01:00.1: PCI INT B disabled
serial 0000:01:00.2: enabling device (0001 -> 0003)
serial 0000:01:00.2: PCI INT C -> GSI 34 (level, low) -> IRQ 34
serial 0000:01:00.2: PCI INT C disabled
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: irq 73 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f100 irq 73
ata2: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f180 irq 73
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:12.0: EHCI Host Controller
ehci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.0: debug port 2
ehci_hcd 0000:00:12.0: irq 18, io mem 0xfea6e000
ehci_hcd 0000:00:12.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:13.0: EHCI Host Controller
ehci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.0: debug port 2
ehci_hcd 0000:00:13.0: irq 18, io mem 0xfea6d000
ehci_hcd 0000:00:13.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
xhci_hcd 0000:00:10.0: setting latency timer to 64
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: ST4000VN000-1H4168, SC43, max UDMA/133
ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST4000VN000-1H41 SC43 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
usb 2-1: new high-speed USB device number 2 using ehci_hcd
sd 1:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 2195.881 MHz.
Switching to clocksource tsc
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 3:256:558
tty ttyS30: hash matches
misc vga_arbiter: hash matches
rtc_cmos 00:05: setting system clock to 2015-02-02 01:33:07 UTC (1422840787)
powernow-k8: Found 1 AMD GX-424CC SOC with Radeon(TM) R5E Graphics (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2200 MHz)
powernow-k8: 1 : pstate 1 (2000 MHz)
powernow-k8: 2 : pstate 2 (1800 MHz)
powernow-k8: 3 : pstate 3 (1600 MHz)
powernow-k8: 4 : pstate 4 (1400 MHz)
powernow-k8: 5 : pstate 5 (1200 MHz)
powernow-k8: 6 : pstate 6 (1000 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1576k freed
Freeing unused kernel memory: 1184k freed
udevd[100]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 79 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168dp/8111dp at 0xffffc9000168a000, 00:00:1a:1b:58:7c, XID 08b00000 IRQ 79
usb 3-1: new high-speed USB device number 2 using xhci_hcd
r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
sdhci-pci 0000:00:14.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
Initializing USB Mass Storage driver...
acpi device:01: registered as cooling_device4
scsi2 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD8GB 7.43 GiB
mmcblk0: p1
usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:12.0-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.3: new low-speed USB device number 4 using ehci_hcd
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
generic-usb 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1.3/input0
scsi 2:0:0:0: Direct-Access SAMSUNG HM502JX PQ: 0 ANSI: 2 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[382]: starting version 175
lp: driver loaded but no devices found
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si 0000:01:00.3: probing via PCI
ipmi_si 0000:01:00.3: enabling device (0000 -> 0003)
ipmi_si 0000:01:00.3: PCI INT D -> GSI 35 (level, low) -> IRQ 35
ipmi_si 0000:01:00.3: [io 0xe000-0xe0ff] regsize 1 spacing 1 irq 35
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: Trying PCI-specified kcs state machine at i/o address 0xe000, slave address 0x0, irq 35
type=1400 audit(1422840799.850:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=579 comm="apparmor_parser"
type=1400 audit(1422840799.850:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=558 comm="apparmor_parser"
type=1400 audit(1422840799.850:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=579 comm="apparmor_parser"
type=1400 audit(1422840799.850:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=558 comm="apparmor_parser"
type=1400 audit(1422840799.850:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=579 comm="apparmor_parser"
type=1400 audit(1422840799.850:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=558 comm="apparmor_parser"
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3227 MBytes.
[fglrx] vendor: 1002 device: 9851 count: 1
[fglrx] ioport: bar 4, base 0xf000, size: 0x100
pci 0000:00:01.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
pci 0000:00:01.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
r8169 0000:01:00.0: eth0: link down
r8169 0000:01:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
snd_hda_intel 0000:00:01.1: irq 80 for MSI/MSI-X
snd_hda_intel 0000:00:01.1: setting latency timer to 64
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
r8169 0000:01:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: IPv6 duplicate address fe80::200:1aff:fe1b:587c detected!
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (939) killed by TERM signal
type=1400 audit(1422840806.762:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1007 comm="apparmor_parser"
type=1400 audit(1422840806.762:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1007 comm="apparmor_parser"
type=1400 audit(1422840806.762:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1007 comm="apparmor_parser"
type=1400 audit(1422840806.946:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1006 comm="apparmor_parser"
type=1400 audit(1422840806.950:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1006 comm="apparmor_parser"
type=1400 audit(1422840807.006:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1010 comm="apparmor_parser"
type=1400 audit(1422840807.006:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1010 comm="apparmor_parser"
type=1400 audit(1422840807.058:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1011 comm="apparmor_parser"
type=1400 audit(1422840807.058:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1011 comm="apparmor_parser"
type=1400 audit(1422840807.086:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=1014 comm="apparmor_parser"
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ipmi_si: There appears to be no BMC at this location
ipmi_si 0000:01:00.3: PCI INT D disabled
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Adding 9765620k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:9765620k
fglrx_pci 0000:00:01.0: irq 81 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1567
[fglrx] Firegl kernel thread PID: 1568
[fglrx] Firegl kernel thread PID: 1569
[fglrx] IRQ 81 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc43000, size:3000
[fglrx] Reserved FB block: Unshared offset:fc46000, size:3ba000
[fglrx] Reserved FB block: Unshared offset:1ffc7000, size:39000
[fglrx] ATIF platform detected with notification ID: 0x81
mmc0: card 0007 removed
mmc0: new high speed SDHC card at address 0002
mmcblk0: mmc0:0002 00000 7.41 GiB
mmcblk0: p1
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
mmc0: card 0002 removed
JBD2: I/O error detected when updating journal superblock for mmcblk0p1-8.
usb 1-1.3: USB disconnect, device number 4
usb 1-1.3: new low-speed USB device number 5 using ehci_hcd
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
generic-usb 0003:046D:C077.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1.3/input0
usb 3-1: USB disconnect, device number 2
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
scsi3 : usb-storage 4-1:1.0
scsi 3:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 31490048 512-byte logical blocks: (16.1 GB/15.0 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb4
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sdb: detected capacity change from 16122904576 to 0
usb 4-1: USB disconnect, device number 2
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 1-1.3: USB disconnect, device number 5
usb 1-1.3: new low-speed USB device number 6 using ehci_hcd
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
generic-usb 0003:046D:C077.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1.3/input0